FTL410QD2C FINISAR 40G多模0.3km光模块
FTL410QD2C
Form Factor: QSFP+
FTL410QD2C QSFP+ transceiver modules are designed for use in 40 Gigabit per second links over parallel multimode fiber, including breakout to four 10 Gigabit per second links. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 and compatible with IEEE 802.3ba 10GBASE-SR. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
key Features:
- Four-channel full-duplex transceiver module
- Hot-pluggable QSFP+ form factor
- Maximum link length of 300m on OM3 Multimode Fiber (MMF) and 400m on OM4 MMF
- Multirate capability: 1.06Gb/s to 10.5Gb/s per channel
- Unretimed XLPPI electrical interface
- Maximum power dissipation < 1.5W
- Reliable VCSEL array technology
- Built-in digital diagnostic functions
- Commercial operating case temperature range 0°C to 70°C
- Single 1×12 MPO receptacle
- RoHS compliant
Applications:
- 40GBASE-SR4 40G Ethernet
- Breakout to 10GBASE-SR Ethernet
- Proprietary interconnections
Specifications:
| FTL410QD2C | |
|---|---|
| Distance | 300 m |
| Data Rate (max) | 41.2 Gb/s |
| Protocol | 10x Fibre Channel Compliant 40G Ethernet Compliant IB QDR Compatible |
| Low End Case Temperature (°C) | 0 |
| High End Case Temperature (°C) | 70 |
| Diagnostics | Digital |
| Transmitter | 4x VCSEL |
| Receiver | PIN |
| Voltage Supply | 3.3 |
| Connector | MPO (MTP12) |
| Wavelength | 850nm Band |
Datasheet and Documents:
FTL410QD2C, 40BASE-SR4/10GBASE-SR 300m QSFP+ Gen2 Optical Transceiver Module
